Shear blade coolant and lubricant
Description
Glasol is a special emulsion used for the lubrication and cooling of shear blades used for cutting glass. Glasol is specially developed to provide extreme good performance without the irritating products normally seen in glass production lubricants.
Benefits
Application
Glasol is used for spraying on glass drop shear blades. The product should be added to the water, never add water to the oil as the emulsion formed will become instable. During mixing it is strongly recommended to use agitation to avoid algae and fungus formation. These could cause blockage of the spraying system, it is recommended to add periodically an algaecide biocide in a rate of 1:1000.
Dilution
Dilute in a concentration of 0,3-0,5%. For optimum performance and minimal bacteria growth the use of demineralised water is strongly advised.
Storage
To be kept under cover. If packages are kept at the open air, rainwater or moisture will contaminate the product. Lubricating oils and greases should not be exposed to sunlight or at low temperatures (frost).
Colour emulsion | Opalescent white |
---|---|
Emulsion pH @ 0,5 | 8,5-9,5 |
Copper corrosion | 1a |
Soap | Free |
Chlorine and sulphur | Free |
Dosage, % | 0,3 - 1,5 |
Emulsion type | Oil-water |
Download Data Sheet