mercury oils

Mercury Glasol


Glasol Rvn no : 1

Shear blade coolant and lubricant


Glasol  is a special emulsion used for the lubrication and cooling of shear blades used for cutting glass. Glasol  is specially developed to provide extreme good performance without the irritating products normally seen in glass production lubricants.


  • Reduced shear marks
  • Prolonged shear blade life
  • Easy maintenance of spraying systems


Glasol is used for spraying on glass drop shear blades. The product should be added to the water, never add water to the oil as the emulsion formed will become instable. During mixing it is strongly recommended to use agitation to avoid algae and fungus formation. These could cause blockage of the spraying system, it is recommended to add periodically an algaecide biocide in a rate of 1:1000.


Dilute in a concentration of 0,3-0,5%. For optimum performance and minimal bacteria growth the use of demineralised water is strongly advised.


To be kept under cover. If packages are kept at the open air, rainwater or moisture will contaminate the product. Lubricating oils and greases should not be exposed to sunlight or at low temperatures (frost).

Colour emulsion Opalescent white
Emulsion pH @ 0,5 8,5-9,5
Copper corrosion 1a
Soap Free
Chlorine and sulphur Free
Dosage, % 0,3 - 1,5
Emulsion type Oil-water


Download Data Sheet