Synthetic Ammonia Refrigeration Compressor Fluid
Description
REFCOMP PRL series are PAO based synthetic compressor fluids. They are specially formulated to lubricate compressors used in ammonia refrigeration systems. The problems normally seen (high oil consumptionreduced efficiency due to pipe clogging) will be history when REFCOMP PRL series is used. This series are fully miscible with conventional mineral oils, therefore a change-over procedure is fairly easy. High concentrations of mineral based product will however reduce the performance. This series in its
compatibility with paints, seals, gaskets and hoses, is similar to mineral oils. No special precautions related to compatibility are required when changing over from a mineral oil lubricant.
Applications
Reciprocating and rotary screw compressors used in ammonia systems as well as gas compressors and vacuum pumps in process systems where ammonia vapours occur.
Advantages
Gas type compatibiltiy
Refcom PRL is suitable for processing the following gases:
R717 (ammonia) | R290 (propane) | R22 |
---|
Typical performance data
Test method | 32 | 46 | 68 | 100 | 220 | 400 | |
Density @ 15 °C, gr/l | 0.842 | 0.850 | 0.860 | 0.860 | 0.850 | 0.850 | |
Viscosity @ 40 °C | ASTM D445 | 34 | 45 | 67 | 104 | 220 | 400 |
Viscosity @ 100 °C | ASTM D445 | 6.1 | 7.42 | 9.94 | 13.77 | 25.0 | 40 |
Viscosity Index | ASTM D2270 | 128 | 129 | 131 | 130 | 149 | 150 |
Pour point, °C | ASTM D97 | -30 | -30 | -30 | -30 | -39 | -39 |
Flash point, °C | ASTM D92 | 227 | 232 | 233 | 246 | 260 | 280 |
Auto ignition point, °C | 340 | 346 | 348 | 357 | 360 | 370 | |
TAN, mg KOH/g | ASTM D664 | <0,01 | <0,01 | <0.05 | <0.05 | <0.05 | <0.05 |
Water content, ppm | ASTM D1744 | <50 | <50 | <50 | <50 | <50 | <5 |
4-ball wear test · Welding load, kg · Scar mm, 1200 RPM 75 °C 20 kg/hr |
ASTM D2793 | 100 0,4 |
100 0,4 |
110 0,4 |
150 0,4 |
na na | na na |
Steel corrosion 24hrs @ 100 °C |
ASTM D665A | None | None | None | None | None | None |
Falex mm, 250 lbs for 10 min. | ASTM D3233 | 0.3 | 0.3 | 0.3 | 0.3 | na | na |
Foaming tendency ml, sequence l | ASTM D892 | 20 | 20 | 20 | 20 | 10/0 | na |
Demulsibility, 55 °C, 30 min | 40/40/0 | 40/40/0 | 40/40/0 | 40/40/0 | 40/40/0 | 40/40/0 | |
Copper corrosion, 24 hr | 1a | 1a | 1a | 1a | 1a | 1a |
Download Data Sheet